Oil Tank Fire 04/17/2014

On April 17, 2014 at approximately 11:24AM the Manchester Fire Department was alerted to a possible structure fire on Depot Street. Original reports suggested that a dining establishment may be on fire. Upon arrival Chief Bourn identified an old tank as the source of the fire. Work crews had been dismantling the tank with cutting torches and had inadvertently ignited oil that remained in the bottom of the tank. Although there was little visible fire, a crew with Engine 5 stretched a hose line to cool smoldering buildup from the walls of the tank, and to cover the remaining oil product in a protective layer of foam. Engine 2 also responded to the scene with support personnel. The State Of Vermont Hazmat Team was notified of the incident, and the MFD cleared the scene within the hour.

All Images: Mike Bober/MFD/Northshire Photo

 

MFD Engine 5 Responds to “Person Stuck in Elevator”

E5 On Scene

E5 On Scene

On the afternoon of August 12, 2013 the Manchester Fire Department was dispatched to a commercial address on Bonnet Street for a report of a person stuck in an elevator. On arrival personnel on Engine 5 found that there was a man trapped near the first floor, and the doors would not open.

Crews attempted to gain access through the first floor doors, but after several attempts at bypassing safety mechanisms they were unable to get the interior door to slide open. The decision was made to make access from the floor above. Members were able to open the second floor exterior doors, and quickly gained entry into the elevator car from its roof hatch. After lowering in a ladder and firefighter, the crew assisted the trapped person to the roof of the elevator car, and then to the second floor.

Engine 5 at elevator rescue

Engine 5 at elevator rescue

Engine 5 was able to quickly clear the scene after ensuring that the elevator was disabled pending service from repair crews.

August Fire Training: Handlines, SCBA Containment

The MFD’s August fire training included several different tasks that various members were able to take part in. While all of the evolutions were basic skills used in the fire service, having an opportunity to practice them in a non-emergency setting helps reinforce what we “already know”, while still giving us a chance to practice new techniques.

Tasks included

  • Hooking to a hydrant and laying in large diameter hose.
  • Advancing handlines and operating nozzles in both fog and smoothbore configurations while using full SCBA equipment.
  • Repacking speedlays to ensure proper deployment.
  • Operation of the department’s new containment system that provides firefighter protection during SCBA filling.
  • Utilization of Rescue 10’s booster system to fill 4500PSI air cylinders.